Window Repairs

Window repairs can save homeowners money and make their homes comfortable. In the event of major damage, such as broken glass or a damaged frame, window replacement may be required.

But many other issues can be fixed to prolong the life of your windows. Some common problems include:

Cracked or broken Panes

It's a rock that's been that was tossed by your lawnmowers or a tree branch blown by high winds, cracked windows are not just visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air to enter your home. It's fairly easy to fix windows that have broken panes.

Begin by carefully removing glass with gloves and safety glasses. You may need use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to clean the surface of the glass and the frame's wood.

After the area is cleaned then apply a waterproof silicone caulking to the frame's perimeter. This will stop water from leaking into the frame through the crack and result in further damage.

A bad crack in double-paned glass may affect the gas between the panes, making your windows less insulative. If the crack is severe enough that it threatens the integrity of the window, or if the pane inside is not there you might need to contact a professional.

Cracks caused by thermal stress can occur when there is a significant temperature difference inside and outside your home. This causes the glass to expand and contract. If this happens to two windows it's best to replace the glass rather than trying to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready for replacement. It can also keep out cold winds and bugs. You can cut an area of nylon stocking or tarp that's sufficient to cover the crack and glue it in place with duct tape. This isn't a permanent solution however it's a great solution in the event of a crisis and keeps insects and cold air from entering your home. If you notice cracks on your older windows it is recommended to contact your local company to see if replacing the whole window is a better option.

Rotten Wood

Wood rot is a common issue with windows. It can affect the appearance of a home and can also be a safety risk. It is possible to repair rotted wood. You will first need to identify the cause of the wood's rot. Look for leaks on the roof and other places where water can enter the wood.

Next, you will need to take out any rotten parts of the window frame. This can be accomplished with the claw hammer, chisel, or rasp. After the rotten areas have been cleared it is time to replace them with new wood. It is recommended to make use of pre-treated wood for this project since it will be resistant to rot. If you cannot replace the damaged timber, you can use wood hardener and filler to strengthen the damaged area. This kind of product will be available at a majority of hardware stores. Follow the instructions on the label of the product to ensure the most efficient results.

After you have repaired the damaged areas of the window sill, it's crucial to protect the area. Apply a water-resistant sealant on the wood. A product like Sikkens is a good choice for this task.

Use a two-part epoxy to protect the wood against further damage. This product is easy to apply and provides a good finish. However, it is very important to adhere to the instructions for application on the label. Once the epoxy filler has dried you can sand the wood's surface. Start with a rough sandpaper and then move on to a smoother grade.

You do not want to expose the rotted part to more moisture. So, it's recommended to cover the repaired area with an oil-based primer that will shield it from moisture. Then, you can reapply the waterproof wood sealant.

Won't Open

A window that isn't opening can be caused by a variety of reasons. Wood frames can warp in rainy weather, or the house may have settled or someone may have closed it to protect themselves. However, with a little patience and the right tools, many windows that are stuck can be opened.

One of the most common causes of a window that isn't opening is the accumulation of debris or gunk on its moving parts. The buildup of dirt and grime on sliding tracks, hinges, and locks over time, according to Acme Glass. Additionally, hardware made of metal may be rusty when it comes in contact with humidity and direct sunlight. Spray grease on these areas to help to prevent oxidation and help keep your windows operating correctly.

Stuck windows can also be the result of an unintentional break or loosening of the pulleys used to raise and lower the window repairs near me. These components can lose their tension and get blocked especially when the window is situated two or more stories above the ground.

If you are having trouble opening a upvc window repair near me Try using a pry bar to gently push the window to open just a little at a time. Put a piece of wood on the frame to give your pry bar more leverage and be careful not to scratch the window or the wood. Alternately, you can run a hair dryer along the edges of the frame for several minutes to warm the wood and assist it to move more easily.

A faulty spring can also be the cause of windows that don't raise or lower. You'll need to refer to the owner's manual for additional information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they won’t open, then it's probably time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home go from functional to unusable. If a window isn't properly shut can make your home vulnerable to water damage and burglary. Contact us today for more information about our replacement windows and our services!