Replacement UPVC Door Handles

If you're replacing the handles or want to add a bit of extra security, you'll find the right handle for your door. Upvc handles are simple to install and meet the required 92mm centres for multipoint locks.

The most important measurements to take into consideration are the backplate fixing centers and lever/key hole dimensions. Compare these measurements with your existing marks carefully before ordering.

Lever/Pad

Lever pad handles are made up of a lever on one side and a paddle-shaped handle on the other. These are designed for use with key wind locks. However they can be affixed to multipoint split spindle door locks.

Once you have selected the correct handle for the doors, the finishes will be displayed in the drop-down menu. Not all styles of handles are available in every finish and it is recommended to check the sizes and technical drawings for the specific product you want to make sure that you are getting the right size and fit.

When you are choosing a new set of upvc lever pad door handles it is crucial to make sure that they match the PZ (distance between the spindle of the handle and the center of the hole in the cylinder) of your current multipoint door locks, as these need to be in line for the doors to remain locked, whether from the inside or the outside. Our handles are designed to fit a wide range of conventional cylinders, but it is always worth double-checking before purchasing.

If you wish to upgrade to dual spindle levers you'll need to remove the handles that are currently in use and then take apart the lock case. This will require an extra split inline cylinder. They can be purchased separately and we offer a full technical diagram that you can take a look at in the pictures for each product.

It is a good idea to loosen the screws that hold your door handle, and then inspect the mechanism. If the screws aren't loose enough then you might need to loosen them further. Then you can remove the spindle from the door handle and replace it with a new Upvc handle. Before you screw the handle into place it is a good idea to ensure that it is in the right position. You can do this by placing your finger in the gap between the frame of the door and the handle to make sure that it is level.

Lever/Lever

The lever handles for doors are used to operate a multi-point lock that uses an Euro cylinder. They can be found on a variety of double upvc doors, as well as on some wooden and aluminum doors. They come in two forms, having a lever on the interior and a paddle on the outside. Sprung - they include a spring cassette inside the backplate to bring the handle lever into an upright position. Non-sprung - they do not have a spring mechanism and will require manual pulled to raise the handle lever to a horizontal position.

To repair a sagging door handle lever you'll need to locate the hole or pin that is the detent access point. It's usually small, protruding ring or rectangular located on the handle base plate. Once you have located the detent access hole or pin, you can remove it using an screwdriver.

After the handle is placed horizontally, you can reinstall the screws. Tighten them to ensure that the handle stays fixed to the base plate. Consider applying a threadlocking solution to the threads of screws to increase grip and prevent them from loosing over time.

There are a variety of reasons why lever door handles droop. The most frequent cause is that the fixings aren't tight and the lever bearing to pull against the door. It could also be that the levers are not being operated at a straight angle and this is causing compression of the latch mechanism and preventing it from fully springing back into service.

A common cause of a sprung lever not working properly is the spring not being in the proper position on the backplate. To check if the handle returns to its horizontal position, simply turn it.

It is crucial to fix any door handles that are damaged as soon as you can. This could cause excessive wear on the screws and the handle could be able to fall off the base plate. It is also recommended to tighten loose screws frequently to prevent them from becoming looser.

Lever/Snib

These handles made of upvc are called "Snib handle sets" and have an snib lock button located at the top of the External door handles And Locks lever. If you do not have a dummy locking device then you can use this feature to lock the door. They are usually fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or lock centre) door lock. We also have a range of other door handles with 68PZ from various manufacturers, including Ferco and Fab & Fix.

You can update your home by changing window handles the door handles regardless of whether you're replacing your existing handles or installing new ones on doors that you constructed. There are a variety of styles of upvc door handle available with traditional levers on backplates, straight or curved short latches, and knob handles that resemble dummy knobs for multi-point locks, that are perfect for French doors.

Lever on backplate handles are often rectangular in shape, however there are also circular or oval shaped versions that are referred to as rose door handles. These handles for double glazed doors are identified by a lever or knob that is mounted on the backplate. The backplate can be removed for concealed fixing.

There are a wide range of coloured and chrome finishes available for these handles to complement your door and other hardware, including hinges, knobs and bolts. Some handles are equipped with a an grub screw that can be used to connect the knob or lever to the spindle. Other handles are supplied with bathroom spindles that can be used to control bathroom locks and include a thumbturn turn and release mechanism, perfect for bathroom doors.

Mortise

If your front door's uPVC handle is stuck in the open position, the cause is most likely to be related to the tubular latch. There are a few reasons for this, one of which is an unlubricated latch plate on the latch plate. It is possible to solve this problem by opening the door, spraying lubricant onto the handle and locking. It could also be that the latch plate has been detached from the backplate. This is a more complicated issue that requires the help of a professional.

A multipoint door handle system is a great solution to solve the issue of a door handle that is stuck. The handles are positioned through the faceplate, and are operated with either a thumb turn or key knob that triggers the cam that locks the deadbolt. The handles are available in various sizes to fit different kinds of uPVC door, and come in various attractive finishes that match the hardware that is currently in use. These handles can be purchased on the internet or through an authorized locksmith in your area. They are simple to install and come with clear instructions.

To select a replacement handle set, you'll have to know the PZ size of your cylinder. This is the distance from the edge of the inner frame of the door to the central point of the hole for the handle in millimetres. It is also important to determine if the door is hook locks or a mortise style lock. Once you know these measurements, the easiest method to determine the right handles is to search by brand option on the website. This will help you narrow down your options and then you'll be able to select the right size.

A typical handle set includes the handle, a pair of different length screws, drill guides and installation instructions. The smart models, like the Igloohome Smart Mortise 2+ includes an entire mortice lock that has built-in keypad. These are more sophisticated units that are best designed for professionals or highly skilled DIYers. Certain handle sets come with many accessories, including weather strips, which can be used to improve the appearance of the door.