Double Glazing Lock Repairs

Having quality locks on your windows and doors will stop burglars from getting into your home. They usually don't want breaking glass or trying to squeeze through windows.

However, some double glazing owners have encountered issues with their door or window lock after it was installed. These issues can be resolved without the need to replace double glazing.

Broken or faulty locks

If your uPVC window or door lock is damaged or broken and requires a locksmith, they can repair it for you. They will be able to repair the striker plates, hinges and locks on your double-glazed. They can also reposition the cylinder to correct any misalignment issues that could be causing the handle to not function properly.

If the key fits inside the lock but it won't turn or Jere Alas is difficult to insert the mechanism might be locked up. This could be due to dirt or grime accumulating inside the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon but not oil as oil can attract dirt, and cause it to stick to the mechanism's inside. After having lubricated, insert the lock key into the lock and Jerealas (Jerealas.top) turn it. The lubricant should make its way through the mechanism and the lock should be able to rotate easily.

A malfunctioning lock could be caused by loose screws within the lock mechanism. They may loosen and fall out or even break off completely, preventing the lock to function properly. The screws can be tightened by using a screwdriver, but be cautious not to tighten them too much. This could damage the internal components.

A faulty lock is dangerous for your family and jerealas.top - Read Significantly more, you. This is especially true if you have small children. It is possible for them to unlock the door without knowing and allow them access to your home. If you're worried about the possibility that this could occur, a licensed professional locksmith can help re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing and can repair any type of defective and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, which means that in most cases, replacement doors and windows are not required.

Handles that are damaged or are damaged

A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great option for those concerned with criminals who are looking for ways to gain access to your home. It's also worth asking your installer about anti-lift blocks which can be put in in addition to the locks that are already in place to help keep your window firmly locked in the closed position.

It's not uncommon for the handles to be damaged or fail - they are the first component of your window that will be forced open by criminals who want to break into. The good news is that this is one of easiest parts to repair.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is available as an option on new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional option on double-glazed window installations.

If a handle is damaged, it's crucial to get it repaired as quickly as possible. The damaged handles could stop the window from closing properly and permit a draft to enter. It may be a weakness that opportunistic burglars might exploit, putting your family and belongings at risk of being stolen.

The process of fixing the malfunctioning mechanism begins by getting access to the frame of the window and removing the damaged handle. The gearbox that opens the handle is accessed and the type identified so a replacement can be found that is in line with the profile of the internal window frame mechanism.

Once the mechanism has been replaced, the handle can be re-attached using the original screws however, we generally recommend replacing them with more long screws since this will provide the most secure fit. The final stage is to apply a coating of clear sealant in order to protect the handle from further rust. After that, your window will be functional again, and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows don't close properly, you could suffer from draughts or an affliction of your home's security barrier, and an increased risk of damp or water damage. Windows hinges that break or fail to function properly are a common occurrence and are easily fixed.

If your uPVC windows don't open or close and close, it's likely the hinges need to be replaced or repaired. While many window companies require that you purchase a new window to solve this issue We can replace the damaged hinges and save you money.

Window hinges are usually damaged by repeated use or weakened over time by corrosion. If you find a damaged hinge, it's important to take precautions to avoid further damage by taking care not to make the window swing open or closed.

You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are all brands of window hinges. It's best to consult a professional in this case so that you don't make the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.

The hinges that are not working properly can cause huge problem for your uPVC window and doors. They can be a major source of noise, and they can also allow water to infiltrate your windows.

Check whether the pin barrels on both sides of the hinge are aligned. If it's not then tap the head pin with an hammer to create a small bend in the barrel of the hinge. This will hold the pin in place. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges and then install screws with glue. Finally, while the glue is drying, put a secure hold on the hinges by using weights or clamps.

After your hinges have been repaired, you should be able to install the door and re-attach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they match up with each the other.

Broken or damaged glass

While uPVC windows do a great job of keeping the cold out and the heat in, they can become damaged over time. This can be the case with broken or damaged glass, as well as defective locks. If left unattended, this can become a very costly issue. It can also detract from the aesthetics of your home and can lead to loss of insulation, which is why it's important to repair any damage as quickly as possible.

You can repair the crack in your glass yourself if you have the appropriate tools and techniques. Make sure the area surrounding the broken glass is free of debris, so that fragments don't cause injury or cause a trip hazard. Then, take any broken pieces and dispose of them properly. Then, place masking tape over the entire area to stop shards from scattering and sticking to your skin when you move them. If you're dealing with a double-paned window, it's a good idea to pre-fit the pane of glass before glueing it back in place so that you know you'll have enough room to complete the project.

Before applying the glue wipe the surface of the damaged frame and glass with a an unclean, dry cloth. Follow the curing and application directions that differ from product-to-product. You may have to clamp the glass that has cracked using clamps that are lightweight and designed to support fragile materials, based on the angle.

Once the adhesive has fully set, carefully place the glass into the window frame. Make sure it's aligned with the frame's edge and that there aren't gaps between the glass sash as well as the frame. Be careful to avoid flexing the window while it's installed, as this could weaken the seal and cause water infiltration and condensation.

If you have a glass window that is broken completely or has bigger cracks, consult a professional glazier such as O'Brien(r) to organise the replacement. It's important to act quickly if you have broken glass.