Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. If you have double glazed window repairs-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems such as sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows to reach the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.

If you can't reposition the hinges, you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively simple to repair a loose upvc window repair handle. First, you'll need to close the window and perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your upvc window repairs near me window is difficult to open, or if it blows open with the breeze. They can be repaired by any skilled DIYer and can be done within a few minutes.

Like any mechanical part, hinges can be damaged over time. Changing a window hinge is essentially a simple procedure, but it is easier to do if you have someone to help you hold the frame up.

Check that the uPVC hinges open and close in the correct direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often solve the issue. We are happy to offer advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your upvc window repairs windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, causing gaps between the frame and sash. They can be repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it's possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and there may come the point when it's more economical to replace them than repair them. If you are experiencing issues with your upvc window repair near me window you should consult an expert immediately.